Foam Cone
Tapered profile · 1-1/4-inch foam bit
POLISH THE DETAILS LARGER PADS MISS.
Reach wheel windows, between spokes and intricate metal surfaces with compact foam polishing bits and your compatible 1/8-inch tool.
- Compact foam reaches tight and angled metal surfaces
- Choose a 1-1/4-inch Foam Cone or Foam Barrel, supplied in a 5-pack
- Pair with liquid metal polish; maximum speed 2,500 RPM
1/8-inch shank5 bits per pack
Best for: wheel windows, spoke gaps and small metal details. Position the loaded bit against the work surface before starting.
Description
This 5-Pack of Foam Polishing Bits are designed for high performance and durability during metal restoration .
Product highlights
- Because they can get into all of the nooks and crannies that conventional buffing wheels or pads cannot, they are the perfect tool for hard to reach surfaces.
- Their tapered and compact design allows for polishing of intricate and angled surfaces such as wheel windows and the area between wheel spokes.
1/8" Foam Polishing Bits: 5 Pack
After attaching these polishing bits to a multi-tool, drill, or any machine that can accepts a 1/8" bit and pair it with a liquid metal polish (such as our Renegade Red Liquid Metal Polish) and apply to the desired areas as shown below:
*Prior to starting your drill or machine, it is important to insert the loaded bit into the wheel/project surface as shown below. this will help to minimize slinging and the deformation of the bit at high speeds that may cause it to blow apart.*
**NOTE THAT THESE BITS SHOULD NOT BE RUN AT ANY SPEED HIGHER THAN 2500 RPM.**
SEE THE VIDEO BELOW FOR PROPER USE GUIDELINES:
The machine should be run at mid-speed while being used to coat and polish the windows of the wheel. Once the liquid polish has has turned a dark gray/black color from being work in, you may use a clean microfiber to clean and remove the polish from the surface. Should additional agitation be required, you may choose to use a coarser terry cloth towel.
The video below offers more insight on how these helpful polishing bits should be used:
Pro Tips:
- Lower RPM for polishing — prevents heat buildup, swirl marks, or burning softer metals like aluminum.
- Higher RPM for cutting — works well for initial scratch removal or blending.
- Always check the manufacturer’s max RPM rating — exceeding it can cause the pad to tear apart.
- If you’re using compounds, slower speeds often give better results for final shine.
CHOOSE YOUR SHAPEReach the details.
Reach the details.
Choose the profile that fits.
Compact foam for wheel windows, spoke gaps and intricate metal surfaces that larger buffs and pads cannot reach.
Foam Barrel
Rounded profile · 1-1/4-inch foam bit
Both options have a 1/8-inch shank. Each five-pack contains your selected shape.
STARTUP + SPEED GUIDE
Load. Position. Polish.
01 · Load
Mount in a compatible tool and apply liquid metal polish.
02 · Position
Place the loaded bit against the work before starting.
03 · Polish
Use controlled speed. Never exceed 2,500 RPM.
This 5-Pack of Foam Polishing Bits are designed for high performance and durability during metal restoration .
Product highlights
- Because they can get into all of the nooks and crannies that conventional buffing wheels or pads cannot, they are the perfect tool for hard to reach surfaces.
- Their tapered and compact design allows for polishing of intricate and angled surfaces such as wheel windows and the area between wheel spokes.
1/8" Foam Polishing Bits: 5 Pack
After attaching these polishing bits to a multi-tool, drill, or any machine that can accepts a 1/8" bit and pair it with a liquid metal polish (such as our Renegade Red Liquid Metal Polish) and apply to the desired areas as shown below:
*Prior to starting your drill or machine, it is important to insert the loaded bit into the wheel/project surface as shown below. this will help to minimize slinging and the deformation of the bit at high speeds that may cause it to blow apart.*
**NOTE THAT THESE BITS SHOULD NOT BE RUN AT ANY SPEED HIGHER THAN 2500 RPM.**
SEE THE VIDEO BELOW FOR PROPER USE GUIDELINES:
The machine should be run at mid-speed while being used to coat and polish the windows of the wheel. Once the liquid polish has has turned a dark gray/black color from being work in, you may use a clean microfiber to clean and remove the polish from the surface. Should additional agitation be required, you may choose to use a coarser terry cloth towel.
The video below offers more insight on how these helpful polishing bits should be used:
Pro Tips:
- Lower RPM for polishing — prevents heat buildup, swirl marks, or burning softer metals like aluminum.
- Higher RPM for cutting — works well for initial scratch removal or blending.
- Always check the manufacturer’s max RPM rating — exceeding it can cause the pad to tear apart.
- If you’re using compounds, slower speeds often give better results for final shine.
Overall rating: 4.6153846 / 5 from 26 reviews.
AI Generated Review Summary
Summary topics
Review topics: ["works","wheels","spots"].
Review highlights
Reviews
Foam shank polishing bits
"Work great, could be a little heavier duty though. Go through about two or so a wheel (depending on the wheel). Other than that, they work great and are definitely a game changer, definitely can’t cut with them like an actual buff, but great for the spots a buff can’t get, just gotta sit there longer and apply very little pressure, or they will destroy themselves, other than that GREAT! Will definitely keep ordering them!"
"awesome product"
Very good stuff
"Recommend this product easy to use and clean"
"Not bad but fell apart too fast. Thankfully they were cheap."
The best for windows
"These are perfect for inserts windows what ever you call them this is the only foam bit you can do a full wheel with out it falling apart"
Breaking
"They work great. The two problems i ran into was putting to much pressure and them breaking/seperating. The other problem i ran into was the tip of them seperating and the tip was just the plastic piece for the bar rubbing my wheel."
Shank bits
"Easy to use works great from spokes"
Perfect
"Works good in small tight areas"
"Perfect 😍"
Great new product
"Just used these this weekend and they are great for getting in to tight spaces on cutouts on wheels when polishing"
