Renegade Landslide All-Terrain Coating
What is Landslide All-Terrain Coating?
Landslide is an all-terrain coating that is designed to provide long-lasting protection against demanding conditions such as harsh weather, UV rays, and physical abrasion. This non-stick coating is durable and provides some scratch protection for your off-road vehicles. The durability of these products work against road debris such as rocks, sand, mud, and snow. Landslide All-Terrain coating also helps to protect the vehicle's underlying surface from chemical damage or etching as it is resistant against acidic substances, harsh detergents, and alkaline cleaners. Hydrophobic or water repellent properties are another feature of this product – it makes water beads form so no water spots affect the surface.
What Ingredients are Found in our Landslide All-Terrain Coating?
- Silane or Siloxane Polymers are used in many coatings because they add a hydrophobic and strong protective layer on the surface of the vehicle. It helps against UV rays, water, and other abrasions.
- Ceramic Nanoparticles can be found in these products as they enhance durability and hardness. These ceramic particles aid in self-cleaning properties and are great for water repellency. Common types of ceramic nanoparticles are SiO2 or TiO2.
- Polymeric resins adhesion and flexibility to these coatings. Types of polymeric resins include acrylics, urethanes, or epoxies.
- Solvents are found in all-terrain coatings as they help dissolve particles and help aid in the drying process. Common solvents are isopropyl alcohol or ethanol.
- Additives such as UV stabilizers, lubricants, and gloss enhancers can be added to improve the application and protective properties of this product.
How to Use Landslide All-Terrain Coating:
To use an all-terrain coating, there are several steps to follow to ensure a proper application. A general guide to using this product is as follows;
- Start by properly preparing and washing the vehicle. As with any coating, the work surface should be clean and free of surface contaminants.
- Shake the bottle thoroughly and spray Landslide onto the vehicle or microfiber round applicator pad. You can spray onto a wet or dry surface.
- After spreading the product evenly, allow for it to cure for 30 - 60 seconds.
- Using a clean microfiber towel, buff off the excess product.
Below are photos of a surface coated with Renegade Landslide All-Terrain Coating 24 hours after a ride--with no agitation or cleaning:
Renegade Landslide less than 24 hours after a ride with no cleaning or agitation:
The SDS Sheet for Landslide All-Terrain Coating can be found here.
