Free shipping on orders over $ 49 (Contiguous USA)


    Check out our Special Edition Kits: Created closely with our partners and affiliates.

    Renegade Products packages many of its best-selling products into convenient and re-usable kit boxes. Get everything you need in a single purchase at a lower price than buying the products individually!

    Esta secção não inclui de momento qualquer conteúdo. Adicione conteúdo a esta secção através da barra lateral.

    Image caption appears here

    Add your deal, information or promotional text

    Renegade Products USA


    Strike Out Water Spot Remover


    Strike Out Water Spot Remover


    What is Water Spot Remover?

    Water spot remover is a formula specially made to remove water spots like stubborn hard water, rain contamination, or mineral deposits effortlessly. Water spots form on a vehicle when water evaporates from the surface, leaving behind marks or calcium. These marks can eventually cause damage if it is not removed. Water spot remover comes in a ready to use 16 oz bottle and a more concentrated gallon. 

    What Ingredients are in Water Spot Removers?

    While water spot removers are made differently from brand to brand, some common ingredients you can find in these products are 

    • Acids are a main active ingredient in water spot removers. However, mild acids are used so no damage occurs. They work to dissolve those hard water spots. Types of acids you can find in this product are citric acid, acetic acid, phosphoric acid, or hydrochloric acid. 
    • Surfactants help to spread the product evenly and lift the minerals off of the vehicle's surface. 
    • Chelating agents also aid in removing those water spots from the surface. A common chelating agent is ethylenediaminetetraacetic acid or EDTA.
    • Polymers work to protect the surface after the water spots are lifted and dissolved. 
    • Solvents or carrier fluids carry the active ingredients and can be anything from water, alcohol, or other solvents.

    How to Use Water Spot Remover?

    Instructions may vary depending on manufacturer; however, a general guide to using this product is as follows

    1. Start by taking any safety precautions such as wearing gloves, eye protection, etc.
    2. Remove any loose dirt or particles with a wash mittcar shampoo, and water. Dry thoroughly with a clean microfiber towel.
    3. Spray the product onto the surface and a microfiber towel or applicator pad for the application process.
    4. Once applied, allow for the product to dwell for a few minutes.
    5. Rinse with water or wipe away the excess product with a clean or damp cloth – depending on the specified instructions.
    6. Dry the surface with a clean microfiber towel to prevent any new water spots from forming. 
    7. Additionally, you can apply a protective product like a wax or sealant to provide extra protection. 

    ✅  Easy to use gentle acidic formulation

    ✅  Can be used on glass, paint & wheels

    ✅  Available in gallon concentration for professional detailers. 

     SDS Sheet for the Strike Out Water Spot Remover

    Click here to access the SDS Sheet for Strike Out Water Spot Remover.