
Two buffs · No center plates
Choose 3-inch Insertable Double-Buff Safety Flanges to mount two compatible wheels without an arbor extension.
Double-buff · SKU LRSRPDBSF3
These flanges measure approximately 4-3/4" across, fit a 3" clinch ring, and have a recess/indentation of 3/4".
Safety Flanges are to be used during high speed polishing and buffing with our Airway Buffing Wheels. They are meant to reduce the chances warping of the center plate of the buffing wheel. In addition to offering protection against warping, Safety Flanges also help to keep the buffing wheel securely in place.
These particular safety flanges are engineered to allow you to mount two (2) Airway Buffing Wheels at a time without the need for an arbor extension. Doing so will allow you to cover more surface area at once for a more efficient cut and/or color stage on your metal polishing products. See below:


Attach the safety flanges to each side of your airway buffing wheel by simply placing the more shallow flange (with the arbor notch on the back) on your grinder's shaft and placing the two buffing wheels on top of the flange while paying special attention to making sure that your wheels will rotate in the appropriate direction. Lastly, place the thicker flange (with the deep recessed threading) on through the centerplates of the buffing wheels to lock everything down. See the video below for some tips on how to mount the flanges and wheels to your machine:
Mount two buffs. Cover more surface.

A WIDER BUFFING SETUP
These Insertable Double-Buff Safety Flanges are engineered to mount two Airway Buffing Wheels at a time without an arbor extension. The side-by-side setup lets you cover more surface area during the cut and color stages of metal polishing.
Match both wheels to the 3-inch clinch-ring fit and confirm the complete setup is compatible with your tool.
FLANGE SELECTION GUIDE
This set is designed for a double-buff configuration. Match the wheel count, center style and mounting dimensions before use.

Choose 3-inch Insertable Double-Buff Safety Flanges to mount two compatible wheels without an arbor extension.
Double-buff · SKU LRSRPDBSF3
For a single centerless airway buff, choose the corresponding single-buff Insertable Safety Flanges.
View single-buff insertable flanges →The 3-inch designation refers to the clinch-ring fit, not the buffing-wheel diameter. The flanges measure approximately 4¾ inches across.
MOUNTING AT A GLANCE
The shallow flange and deeply recessed threaded flange have different roles. Follow the product’s mounting sequence and check wheel rotation before use.

Two wheels sit side by side, held together by the matched shallow and deep flange components.
Confirm shaft fit, tool clearance and secure engagement before polishing. Follow the tool, wheel and hardware operating ratings.
Disconnect the tool from power. Place the shallower flange, identified by the arbor notch on the back, onto the grinder’s shaft.
Place the two compatible centerless buffing wheels over the flange. Check that both wheels will rotate in the appropriate direction.
Fit the thicker flange with the deeply recessed threading through the wheel centers and fasten the assembly according to the mounting instructions.
Use the mounting video below for the product-specific setup. The two-wheel design does not increase the permitted operating speed of any component.
KNOW YOUR FLANGE DIMENSIONS
The mounting fit specified for these double-buff flanges.
The outside flange diameter; this is separate from the buff diameter.
The product’s stated recessed depth. Verify the complete assembly fits your machine.

DOUBLE-BUFF IN USE
The paired wheels create a wider working face for your metal-polishing process. Choose the wheel treatment and compound appropriate for the metal and polishing stage.

WATCH THE INSTALLATION GUIDE
Watch the product-specific installation tips for mounting the flanges and both wheels to your machine.
DOUBLE-BUFF SAFETY FLANGE FAQ
They are engineered to mount two Airway Buffing Wheels at the same time without an arbor extension, allowing more surface coverage during the cut and color stages.
No. This product is designated for buffing wheels without center plates. Confirm both wheels have the appropriate 3-inch clinch-ring configuration.
It refers to the clinch-ring fit. The flanges measure approximately 4¾ inches across and have a ¾-inch recess or indentation. It is not the buffing-wheel diameter.
Start with the shallower flange with the arbor notch on the back. Position both wheels in the correct rotation direction, then fit the thicker flange with the deep recessed threading to secure the assembly.
Confirm the shaft, mounting engagement, wheel dimensions and tool clearance before use. Follow all component ratings; the lowest-rated component limits the assembly. The double-buff design does not make every grinder compatible.
BUILD YOUR DOUBLE-BUFF SETUP
For compatible centerless wheels with a 3-inch clinch ring.
Overall rating: 5.0 / 5 from 6 reviews.
Review topics: [].
"I love using the three inch flange the double wheels is so much easier you don’t get the shading lines..thank you so much Ernie #SICSHINE"
"Seem well made like the others"
"Amazing product"
"Can’t wait to try this"
"Stackin 20ply buffs is where it’s at!!!!!"
"Solid product good clean cut threads"
You are currently shipping to United States and your order will be billed in USD $.